Three Ply & 5 Ply Automatic Paper Corrugated Board Machinery

Hydraulic Shaftless Mill Roll Stand

Approx Price: Rs 8 Lakh / Unit(s) 
Features:

  • The structure is double rotary shafts with four arms.
  • Hydraulic control for paper mill roller up-down, clamp-open and centering.
  • Web tension is controlled by pneumatic brake or manual brake; Springiness chucks are optional.
  • Effective width : 900mm - 2200mm; Maximum paper roll diameter:01500mm.
  • Maximum support weight : 3T.
  • Main axis : 0242mm.

SF-320S & 360S Fingerless Single Facer

Feature:

  • 320S Design Speed : 120m/min
  • 360S Design Speed : 150m/min
  • Effective width : 1400mm - 2500mm
  • Corrugated roller : 0 320 (0 360) mm
  • Corrugating roller, pressure roller and glue rollers are by pneumatic adjustment.
  • The glue part surface are treated by special mesh snicked and chrome plated.
  • Cardboard transmit adopts vacuum suction method, with wind control system. Keep flute profiles stable of the lower-roller in running condition.
  • Bearing of corrugated and pressure roller adopt high temperature lubricate grease.

Fingerless Single Facer-SF-280S

Features:

  • Design Speed : 80m/min C2D
  • Effective width : 1400mm - 2500mm Corrugated roller : 0 280 mm
  • Corrugating roller, pressure roller and glue rollers (1..) are by pneumatic adjustment.
  • The glue part surface are treated by special mesh snicked and chrome plated.
  • Cardboard transmit adopts vacuum suction method, with wind control system. Keep flute profiles stable of the lower-roller in running condition.
  • Bearing of corrugated and pressure roller adopt high temperature lubricate grease.

Mechanical Shaft Less Mill Roll Stand

Features

  • Maximum paper roll diameter : 01400mm
  • Maximum support weight : 2T.
  • Rounded-plate type manual brake, the web tension is adjusted at any time.
  • Arm Clamp and rotary structure set fixed torque clutch, operated safely.
  • The structure is double rotary shaft with four arms; Support two paper mill rolls on both arms at the same time.

Pre Heater

Features

  • Diameter of the pre-heater roller : 0 800mm, 0 900mm, 0 1100mm.
  • Effective width : 1400mm - 2200mm.
  • Simplex, duplex or triplex preheater according to requirement.

Simplex Duplex Glue Machine

Features:

  • Design speed : 150m/min
  • Special line on the surface of the glue applicator, surface are hard chrome plating, even glue supply, low cost.
  • Adjustment for gap between glue roller and doctor roller by electric or manual are optional. Digital read out for the gap between glue roller and doctor roller by electric or manual are optional.
  • Press roll moves up and down by pneumatic.
  • Self-circulating glue supplying system to avoid glue hardening and to control glue quality.
  • Press roll and press bar are optional.

Double Facer

Features

  • Heating plate is surface grinded and chrome-plated.
  • Dense weight rollers be used in heating section, 3 stage adjustable pressure for weight rollers are controlled by pneumatic system according to thickness of paperboard (optional).
  • Tension control for upper cotton belt by pneumatic cylinder. Automatic or manual correcting device are optional.
  • Drive section adopt gearbox, driven by electromagnetic speed control motor or frequency conversion motor.
  • Drive rollers be covered endure abrasion rubber and cutting "V" from teeth, with drum and put out paperboard stable.

N C Cut - Off Machinery

Features:

  • Max. design speed : Straight knives 120m/min, Helical knives 150m/min.
  • Effective width : 1400mm - 2500mm.
  • Length of cutting cardboard : 500 - 9999mm.
  • Short diameter of knife shaft, high average speed better to improve the productivity.
  • Exact and adjustable no gap gear assure knife-edge joggle exactly.
  • NC. reserve groups of order, and auto-complete as the procedure or according as preferential condition, the screen display various production message.

Paper Sheet Delivery & Side Conveyor

Features

  • Max. sheet length : 2800mm
  • Automatic stack and collect cardboard.
  • With electromotion transmit horizontally.
  • Vertical meet cardboard adopt wide conveyor belt to transmit.
  • The sheet or height of cardboard will be moved out by switch control when reaching request.

Cardboard Cut-Off Corrugation Machines

We are very acclaimed and renown manufacturer of Cardboard N C Cut-Off Corrugation Machine. Our products are highly demanded because of their excellent designs, smooth finish and high efficiency. It is our pleasure to offer quality services to our clients and to fulfill the demands of our customers, we have team of experienced professionals and through our hard work in this domain, we have appeared as one of the leading firm. We procure authentic quality raw material from the most valued source.

 

Specifications:

 

  • Short diameter of knife shaft, high average speed better to improve the productivity

  • Effective width : 1400 mm to 2500 mm

  • Length of cutting cardboard : 500- 9999 mm

  • Max. design speed Straight knives 120 m/min, Helical knives 150 m/min

  • Exact and adjustable no gap gear assure knife-edge joggle exactly

  • NC. reserve groups of order, and auto-complete as the procedure or according as preferential condition, the screen display various production message

Looking for Three Ply & 5 Ply Automatic Paper Corrugated Board Machinery ?
© B.R.D. Manufacturing Company
 
Desktop Site Back to top